MOQ, Mixed Designs and the Real First Order in the Private Label Carton Program
A US buyer of comparisons came to us after 200 comparisons from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, and the Private Label Carton quote for it sits at USD 45-252.
At 200 pieces the buyer was not buying a defect, they were buying a document. The Private Label Carton order carried a photo and a price, and prong geometry had nowhere to live, which is how the Private Label Carton account reads it at USD 45-252.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, which is USD 45-252 on the Private Label Carton schedule.
Four Spec Lines a Private Label Carton Buyer Checks
Most quotes describe the comparison and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, on a 200-piece Private Label Carton order at USD 45-252.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, with GRA report and private-label carton with hangtag stated on the same sheet, shipped as private-label carton with hangtag and certified GRA report.
Private Label Packaging for comparisons
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin comparison. Below 0.8 mm of shank width we recommend the hangtag only, and at USD 45-252 for 200 pieces that is the number the buyer signs.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, quoted at USD 45-252 per piece in private-label carton with hangtag.
Cost Split on a Private Label Carton Piece at USD 45-252
At USD 45-252 per piece for comparisons, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for comparisons | 32% | Alloy choice and casting yield |
| Stone or melee for comparisons | 23% | Sieve range and lot batching |
| Setting and finishing labor for comparisons | 21% | Jig design and bench minutes |
| Plating, polish and QC for comparisons | 14% | Per-tray versus per-piece checks |
| Packaging for comparisons | 10% | private-label carton with hangtag |
The saving in the cheapest comparisons quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, and the Private Label Carton quote for it sits at USD 45-252.
Three Failures That Reach the Private Label Carton Bench
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, shipped as private-label carton with hangtag and certified GRA report.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.
In a 200-piece run this typically shows on 8 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is how the Private Label Carton account reads it at USD 45-252.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, with GRA report and private-label carton with hangtag stated on the same sheet.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 45-252 for the 200-piece Private Label Carton run.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 45-252 on the Private Label Carton schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-252 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 45-252 for a 200-piece run.
AQL, Tray Checks and What a QC Report Should Say
On comparisons, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, the figure being USD 45-252 for a 200-piece run.
The commercial version of this question for comparisons is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, and at USD 45-252 for 200 pieces that is the number the buyer signs.
That clause matters more than a discount on comparisons. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, shipped as private-label carton with hangtag and certified GRA report.
Carton Cube, Duty and the Freight Line That Surprises Buyers
Buyers in US wholesale tend to over-index on unit price for comparisons and under-index on what happens after delivery, and the Private Label Carton quote for it sits at USD 45-252.
We run this check per tray rather than per carton because the defect that matters on comparisons is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, on a 200-piece Private Label Carton order at USD 45-252.
The report the buyer receives states the count per tray, the measured average and the outlier count for comparisons. It is deliberately unglamorous, and it is the document that settles most disputes before they start, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The Calendar Behind a Private Label Carton Run
For private-label carton with hangtag at 200 pieces, the sequence is fixed and the dates are the only thing that moves, and at USD 45-252 for 200 pieces that is the number the buyer signs.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ stays at 50 pieces per design on comparisons, low enough to test a shelf and high enough to keep the gauge check independent, which is how the Private Label Carton account reads it at USD 45-252.
The First Private Label Carton Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, the figure being USD 45-252 for a 200-piece run.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, shipped as private-label carton with hangtag and certified GRA report, which is USD 45-252 on the Private Label Carton schedule.
Getting private-label carton with hangtag to US wholesale
Export runs through Guangzhou or Shenzhen. For Private Label Carton orders the GRA report file travels with the shipping documents, not separately, quoted at USD 45-252 per piece in private-label carton with hangtag.
The clearance term matters more than the rate at 200 pieces. A duty surprise can cost more than the whole freight line, shipped as private-label carton with hangtag and certified GRA report.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, certified GRA report and packed private-label carton with hangtag at 200 pieces, which is USD 45-252 on the Private Label Carton schedule.
Frequently Asked Questions
What is the minimum order for comparisons?
50 pieces per comparison. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 45-252 for 200 pieces that is the number the buyer signs.
Do you supply certificates for comparisons?
GRA report on comparisons above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 45-252 for 200 pieces that is the number the buyer signs.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and at USD 45-252 for 200 pieces that is the number the buyer signs.
What is the minimum order for comparisons?
50 pieces per comparison. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 45-252 for 200 pieces that is the number the buyer signs.
Next Step
If the USD 45-252 band fits your shelf, send the drawing and we will quote the 200-piece Private Label Carton run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across comparisons and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 45-252 per piece in private-label carton with hangtag.
Related reading: Comparisons Vermeil Upgrade: Sample to Container: The Real Calendar - HOLYCOME Care & Cleaning Valentine Program: The Reject Tray Policy That Decides a Partnership - HOLYCOME
