What the Quote Actually Covers
The brief was simple: 50 industry Insights, 10K/14K/18K gold, delivered before May. The run that arrived carried 17 pieces with stamp accuracy, and the buyer spent USD 30-115 on sorting before the goods reached a shelf, the figure being USD 56-400 for a 50-piece run.
On a 50-piece order at USD 56-400, a stamp accuracy rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, which is USD 56-400 on the Made to Order schedule.
The Made-to-Order Path for industry Insights
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, and the Made to Order quote for it sits at USD 56-400.
Twenty days is realistic for a new industry Insight when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, priced at USD 56-400 for the 50-piece Made to Order run.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, which is how the Made to Order account reads it at USD 56-400.
The Three Failures We See Most in Incoming Samples
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, certified IGI report and packed single-piece foam box at 50 pieces.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, with IGI report and single-piece foam box stated on the same sheet.
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, with IGI report and single-piece foam box stated on the same sheet.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as single-piece foam box and certified IGI report.
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and the Made to Order quote for it sits at USD 56-400.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 56-400 for a 50-piece run.
What US buyers Check Before They Sign
At USD 56-400 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these into the Made to Order purchase order and the arrival check becomes arithmetic instead of recollection, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Made to Order file records at USD 56-400 in single-piece foam box.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 56-400 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 56-400 for the 50-piece Made to Order run.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified IGI report and packed single-piece foam box at 50 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 56-400 for a 50-piece run.
Where USD 56-400 Per Piece Actually Goes
Cost at USD 56-400 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for industry Insights | 30% | Alloy choice and casting yield |
| Stone or melee for industry Insights | 20% | Sieve range and lot batching |
| Setting and finishing labor for industry Insights | 19% | Jig design and bench minutes |
| Plating, polish and QC for industry Insights | 12% | Per-tray versus per-piece checks |
| Packaging for industry Insights | 19% | single-piece foam box |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, and the Made to Order quote for it sits at USD 56-400.
Sample to Container: The Real Calendar
Most industry Insights disputes we arbitrate trace back to this line, not to the defect itself, priced at USD 56-400 for the 50-piece Made to Order run.
Three numbers decide it for industry Insights: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, shipped as single-piece foam box and certified IGI report.
We send a one-page sheet with every industry Insights quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, the figure being USD 56-400 for a 50-piece run.
AQL, Tray Checks and What a QC Report Should Say
On industry Insights, the cheapest answer is rarely the cheapest outcome once the second season is counted, which the Made to Order file records at USD 56-400 in single-piece foam box.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on industry Insights and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which is USD 56-400 on the Made to Order schedule.
We would rather lose a first order of industry Insights on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, quoted at USD 56-400 per piece in single-piece foam box.
What This Means for a First Order
A first Made to Order order of 50 pieces per design at USD 56-400 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the IGI report batch sheet with the first shipment. Both are free and both decide the reorder, with IGI report and single-piece foam box stated on the same sheet.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, which the Made to Order file records at USD 56-400 in single-piece foam box.
FOB is the default on industry Insights and DDP is the option. Buyers new to North American retail usually take DDP once, then switch after they see the breakdown, quoted at USD 56-400 per piece in single-piece foam box.
If stamp accuracy appears in the arrival check, the retained tray decides who owns it. Keep the IGI report batch sheet in the same folder as the packing list, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
How a Repeat Order Gets Built
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, which is how the Made to Order account reads it at USD 56-400.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 56-400 on the Made to Order schedule.
How long does a reorder of the same industry Insight take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified IGI report and packed single-piece foam box at 50 pieces.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white industry Insights, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with IGI report and single-piece foam box stated on the same sheet.
How is industry Insights packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Made to Order quote for it sits at USD 56-400.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 56-400 on the Made to Order schedule.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Made to Order, and at USD 56-400 for 50 pieces that is the number the buyer signs.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, on a 50-piece Made to Order order at USD 56-400.
Related reading: Industry Insights Private Label Carton: MOQ, Mixed Designs and the Real First Order - HOLYCOME Trends & Styles Q4 Holiday Stock: How the Second Order Becomes Cheaper - HOLYCOME
