What the Quote Actually Covers in the Made to Order Program
A US buyer of wholesale Sourcing sent us a competitor's wholesale Sourcing in March with one question: why does this fail at prong geometry after a season. We measured it, rebuilt the spec around stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, and shipped 50 wholesale Sourcing that cleared inspection with zero rejects, certified IGI report and packed single-piece foam box at 50 pieces.
That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, priced at USD 47-262 for the 50-piece Made to Order run.
We kept the Made to Order price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, which is USD 47-262 on the Made to Order schedule.
The Made-to-Order Path for wholesale Sourcing
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, quoted at USD 47-262 per piece in single-piece foam box.
Twenty days is realistic for a new wholesale Sourcing when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, certified IGI report and packed single-piece foam box at 50 pieces.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, the figure being USD 47-262 for a 50-piece run.
Three Failures That Reach the Made to Order Bench
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, which is how the Made to Order account reads it at USD 47-262.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Made to Order file records at USD 47-262 in single-piece foam box.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, with IGI report and single-piece foam box stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, shipped as single-piece foam box and certified IGI report.
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, certified IGI report and packed single-piece foam box at 50 pieces.
In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, certified IGI report and packed single-piece foam box at 50 pieces.
Four Spec Lines a Made to Order Buyer Checks
The Made to Order buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, quoted at USD 47-262 per piece in single-piece foam box.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of the four adds cost at USD 47-262. They add about 22 seconds per piece and remove the reason to inspect twice.
Terms Behind a Made to Order Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as single-piece foam box and certified IGI report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 47-262 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Made to Order file records at USD 47-262 in single-piece foam box.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Made to Order account reads it at USD 47-262.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 50-piece Made to Order order at USD 47-262.
Cost Split on a Made to Order Piece at USD 47-262
At USD 47-262 per piece for wholesale Sourcing, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Sourcing | 32% | Alloy choice and casting yield |
| Stone or melee for wholesale Sourcing | 23% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Sourcing | 21% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Sourcing | 14% | Per-tray versus per-piece checks |
| Packaging for wholesale Sourcing | 10% | single-piece foam box |
The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, which is how the Made to Order account reads it at USD 47-262.
Sample to Container: The Real Calendar
Buyers who have run three programs on wholesale Sourcing know this instinctively; first-time buyers learn it the expensive way, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
Three numbers decide it for wholesale Sourcing: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and at USD 47-262 for 50 pieces that is the number the buyer signs.
We send a one-page sheet with every wholesale Sourcing quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, priced at USD 47-262 for the 50-piece Made to Order run.
AQL, Tray Checks and What a QC Report Should Say
The short version for wholesale Sourcing: it is arithmetic, not relationship. The long version is below, shipped as single-piece foam box and certified IGI report.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on wholesale Sourcing and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, certified IGI report and packed single-piece foam box at 50 pieces.
We would rather lose a first order of wholesale Sourcing on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, the figure being USD 47-262 for a 50-piece run.
The First Made to Order Order
Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, on a 50-piece Made to Order order at USD 47-262.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Made to Order run, priced at USD 47-262 for the 50-piece Made to Order run.
Getting single-piece foam box to US wholesale
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US wholesale, shipped as single-piece foam box and certified IGI report, and at USD 47-262 for 50 pieces that is the number the buyer signs.
FOB is the default and DDP is the option. Buyers new to US wholesale usually take DDP once and then switch after they see the breakdown, and at USD 47-262 for 50 pieces that is the number the buyer signs.
At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, which is USD 47-262 on the Made to Order schedule.
The Calendar Behind a Made to Order Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on wholesale Sourcing at USD 47-262.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, the figure being USD 47-262 for a 50-piece run.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 47-262.
How long does a reorder of the same wholesale Sourcing take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 47-262 on the Made to Order schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white wholesale Sourcing, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with IGI report and single-piece foam box stated on the same sheet.
How is wholesale Sourcing packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 47-262 per piece in single-piece foam box.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 47-262.
Next Step
If the USD 47-262 band fits the shelf, send a drawing and we quote the 50-piece Made to Order run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across wholesale Sourcing and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, shipped as single-piece foam box and certified IGI report.
Related reading: Wholesale Sourcing Private Label Carton: MOQ, Mixed Designs and the Real First Order - HOLYCOME Certification Explained Q4 Holiday Stock: How the Second Order Becomes Cheaper - HOLYCOME
